Australian casino games

Win huge money bonus at casino australianonlinecasino1 - List of Best Internet Casinos in Australia

Bring your ideas to life

Post a project

Classical Bronze

Description

After processing, the finish of the component is about a 600 ?in Ra (15 ?m Ra) with small printing lines remaining visible. Bead blasting improves the finish to approximately 300 ?in Ra (7.5 ?m Ra). Barrel finishing can improve external surfaces to a 50 ?in Ra (1.25 ?m Ra). Hand polishing, plating, and anti-corrosion treatments are also available. FinishingThe final step is to gradually cool the furnace to anneal the part. Annealing lowers the tensile and yield strength, making the part less brittle for post machining such as milling, drilling and tapping operations. The component can also be welded and soldered.AnnealingInfiltration is performed to increase part density to approximately 95% by filling in all remaining voids between the metal particles. Bronze, typically, is wicked into the component through a stilt which is printed into the component and removed after processing. InfiltrationThe part(s) are placed in a graphite crucible, surrounded by support media, and placed in a vacuum furnace for one 24-36 hour cycle of sintering, infiltrating and annealing. Sintering is performed at about 1100Ã?????Ã????Ã???Ã??Ã?°C to burn off the binder and metallurgically bond the metal particles. After sintering the component is approximately 60% dense.SinteringAfter curing, loose metal powder is vacuumed out of the build box. Air is used to dislodge any loose powder from the part. The excess metal powder is recycled. The part is fragile, but can be handled.DepowderingAfter printing, the build box containing the completed piece or pieces is removed from the machine and placed into an oven for curing of the binder to produce green strength for handling. Depending on the mass of the component(s), the curing operation takes 6-12 hours.316 Stainless Steel Infiltrated with Bronze. The 3D printing process in metal includes printing, curing, depowdering, sintering, infiltrating and annealing. Curing

Uploading your Model Please Wait...

  • Sell Models Too

  • - Worldwide Shipping

  • - Vibrant Community

  • - 200mb Upload Limit

  • Invalid Model

62%
Powered by Digital Factory™