An espresso cup with the base of an office chair. Only available in ceramic.

Pendant shaped like Greece including terrain data. Sized approximately 3.5cm by 3.5cm with a hook on the back to attach to necklaces. Samples images of Greece's shape and pendant dimensions (country: Albania, material: Silver). The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds. The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Kraftwurx or with specific requests for dimensions. The data used to generate this item is the “Hole-filled seamless SRTM data V4” provided by the International Centre for Tropical Agriculture (CIAT). This data is available publicly at srtm.csi.cgiar.org. The Society for Printable Geography is not afiliated with CIAT in any way.

Pendant shaped like Hungary including terrain data. Sized approximately 3.5cm by 3.5cm with a hook on the back to attach to necklaces. Samples images of Hungary's shape and pendant dimensions (country: Albania, material: Silver). The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds. The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Kraftwurx or with specific requests for dimensions. The data used to generate this item is the “Hole-filled seamless SRTM data V4” provided by the International Centre for Tropical Agriculture (CIAT). This data is available publicly at srtm.csi.cgiar.org. The Society for Printable Geography is not afiliated with CIAT in any way.

Pendant shaped like United Kingdom including terrain data. Sized approximately 3.5cm by 3.5cm with a hook on the back to attach to necklaces. Samples images of United Kingdom's shape and pendant dimensions (country: Albania, material: Silver). The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds. The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Kraftwurx or with specific requests for dimensions. The data used to generate this item is the “Hole-filled seamless SRTM data V4” provided by the International Centre for Tropical Agriculture (CIAT). This data is available publicly at srtm.csi.cgiar.org. The Society for Printable Geography is not afiliated with CIAT in any way.

Pendant shaped like Cyprus including terrain data. Sized approximately 3.5cm by 3.5cm with a hook on the back to attach to necklaces. Sample images of Cyprus' shape and pendant dimensions (country: Albania, material: Silver). The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds. The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Kraftwurx or with specific requests for dimensions. The data used to generate this item is the “Hole-filled seamless SRTM data V4” provided by the International Centre for Tropical Agriculture (CIAT). This data is available publicly at srtm.csi.cgiar.org. The Society for Printable Geography is not afiliated with CIAT in any way.

Pendant shaped like Canada including terrain data. Sized approximately 3.5cm by 3.5cm with a hook on the back to attach to necklaces. Sample images of Canada's shape (islands are not printed) and pendant dimensions (country: Albania, material: Silver). The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds. The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Kraftwurx or with specific requests for dimensions. The data used to generate this item is the “Hole-filled seamless SRTM data V4” provided by the International Centre for Tropical Agriculture (CIAT). This data is available publicly at srtm.csi.cgiar.org. The Society for Printable Geography is not afiliated with CIAT in any way.

Pendant shaped like Finland including terrain data. Sized approximately 3.5cm by 3.5cm with a hook on the back to attach to necklaces. Samples images of Finland's shape and pendant dimensions (country: Albania, material: Silver). The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds. The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Kraftwurx or with specific requests for dimensions. The data used to generate this item is the “Hole-filled seamless SRTM data V4” provided by the International Centre for Tropical Agriculture (CIAT). This data is available publicly at srtm.csi.cgiar.org. The Society for Printable Geography is not afiliated with CIAT in any way.

Pendant shaped like Colombia including terrain data. Sized approximately 3.5cm by 3.5cm with a hook on the back to attach to necklaces. Sample images of Colombia's shape and pendant dimensions (country: Albania, material: Silver). The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds. The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Kraftwurx or with specific requests for dimensions. The data used to generate this item is the “Hole-filled seamless SRTM data V4” provided by the International Centre for Tropical Agriculture (CIAT). This data is available publicly at srtm.csi.cgiar.org. The Society for Printable Geography is not afiliated with CIAT in any way.

Pendant shaped like Burkina Faso including terrain data. Sized approximately 3.5cm by 3.5cm with a hook on the back to attach to necklaces. Sample images of Burkina Faso's shape and pendant dimensions (country: Albania, material: Silver). The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds. The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Kraftwurx or with specific requests for dimensions. The data used to generate this item is the “Hole-filled seamless SRTM data V4” provided by the International Centre for Tropical Agriculture (CIAT). This data is available publicly at srtm.csi.cgiar.org. The Society for Printable Geography is not afiliated with CIAT in any way.

Pendant shaped like Gambia including terrain data. Sized approximately 3.5cm by 3.5cm with a hook at the top to attach to necklaces. Sample images of Gambia's shape and pendant dimensions (country: Albania, material: Silver). The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds. The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Kraftwurx or with specific requests for dimensions. The data used to generate this item is the “Hole-filled seamless SRTM data V4” provided by the International Centre for Tropical Agriculture (CIAT). This data is available publicly at srtm.csi.cgiar.org. The Society for Printable Geography is not afiliated with CIAT in any way.

Pendant shaped like Australia including terrain data. Sized approximately 3.5cm by 3.5cm with a hook on the back to attach to necklaces. Sample images of Australia's shape and the pendant dimensions (country: Albania, material: Silver). The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds. The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Kraftwurx or with specific requests for dimensions. The data used to generate this item is the “Hole-filled seamless SRTM data V4” provided by the International Centre for Tropical Agriculture (CIAT). This data is available publicly at srtm.csi.cgiar.org. The Society for Printable Geography is not afiliated with CIAT in any way.

Pendant shaped like Aruba including terrain data. Sized approximately 3.5cm by 3.5cm with a hook on the back to attach to necklaces. Samples images of Aruba's shape and pendant dimensions (coutry: Albania, material: Silver). The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds. The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Krafwurx or with specific requests for dimensions. The data used to generate this item is the “Hole-filled seamless SRTM data V4” provided by the International Centre for Tropical Agriculture (CIAT). This data is available publicly at srtm.csi.cgiar.org. The Society for Printable Geography is not afiliated with CIAT in any way.

Pendant shaped like United States including terrain data. Sized approximately 3.5cm by 3.5cm with a hook on the back to attach to necklaces. Sample images of USA in Silver. The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds. The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Kraftwurx or with specific requests for dimensions. The data used to generate this item is the “Hole-filled seamless SRTM data V4” provided by the International Centre for Tropical Agriculture (CIAT). This data is available publicly at srtm.csi.cgiar.org. The Society for Printable Geography is not afiliated with CIAT in any way.